Umbriano®

Important Information

Umbriano is the ideal pool deck, patio or driveway paver. Umbriano is unaffected by chlorine, salt pool water, and is resistant to de-icing salts as well. The clean, sleek, and modern lines make it the most contemporary paver available. Umbriano also has EasyCleantechnology allowing for quick cleanup of food and other dirty spills!

Base Requirement & Bedding Course – standard paver base specification

Handling and Installation– A vacuum placement tool (Pavemor Paver Placer) must be used when placing 16” x 16” or 24” x24” sizes. Care must be taken to avoid tossing stones so that they bang against each other. Damage to the surface appearancecan happen if handled too rough. A protective pad is required when doing the final paver surface compaction. Make sure thatthere is NO sand on the surface nor in the joints prior to final surface compaction. Install from multiple pallets for best colordistribution.

Accent compatibility – The 8 x 16 and the 8 x 8 units can be used as a sailor course or soldier course.

Jointing Material and Joint Stabilization

• Good: Ordinary dry joint sand
  • Better: Most polymeric sands can be used (proper cleaning is essential prior to and during activation)
• Best:  ordinary dry joint sand stabilized by a water-based or solvent based joint sand stabilizer sealer.

 Sealers

• Product may be sealed but it is not absolutely required
• Most concrete paver sealers can be used on this product
• Product must be cleaned before sealing

Cleaners –Umbriano has EasyClean, a dirt and stain repellant, manufactured directly into the surface of the stone, assists incleanup of initial spills and stains. Longer term stains may require a cleaner. Any paver cleaner from Unilock, Techniseal,Surebond or BP- Pro is acceptable.  Testing a small area is recommended to ensure acceptable results.

Special note: To avoid issues with height variance, do not use as a direct overlay on concrete.

Caution: When using unit sizes larger than 8” x 8” in a vehicular application, please contact a Unilock Representative for technical advice and support. (Damage may occur to larger units if used for incorrect applications.)

Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!

TECHNICAL INFORMATION

ASTM C 936 Standard Specifications for Solid Concrete Interlocking Paving Units

Conforms to:

• C140 for Absorption and Compressive Strength > 8,000 PSI
• C67 for Freeze-thaw Durability
• C418 for Abrasion Durability

Unilock standards exceed 8,500 PSI for Umbriano products with:

• 4% absorption avg.
• 5% absorption max.
• Dimensional Accuracy +/- 3/64”

Test results available upon request

Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines

LEED INFORMATION

Materials and Resources: LEED V4:

Building Product Disclosure and Optimization

Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point

Sourcing of Raw Materials – Leadership Extraction Practices • 1 point

Material Ingredient Reporting – Material Ingredient Reporting • 1 point

Material Ingredient Reporting – Material Ingredient Optimization • 1 point

Environmental Product Declaration • 1 point

Umbriano Summer Wheat, 48

Umbirano Winter Marvel, 38