Il Campo®

Important Information

Brushed clay brick is the best way to describe this Unilock exclusive paver. Made with EnduraColor, Il Campo’s uniquely engrained slip resistant surface features angular brush lines on the surface, creating wonderful highlights in early morning or evening lighting conditions.

Base Requirement & Bedding Course – Standard or open graded paver base material for raised patios and step areas.

Handling and Installation – A protective pad is required when doing the final paver compaction. Care must be taken to avoid tossing stones so that they bang against each other. Damage to the surface appearance can happen if handled too rough. Both random and linear patterns are common. Install from multiple pallets for best color distribution. Gloves recommended.

Accent compatibility – The 4” x 8” units can be used as a sailor or soldier course. The 4” x 8” size is ideal for accenting in walls.

Jointing Material and Joint Stabilization

• Good: Dry jointing sand
• Best: Dry jointing sand stabilized by a solvent based joint sand stabilizer sealer (for impervious installations only)

Special Note: Polymeric Sands are not recommended.

 Sealers

• Product may be sealed but it is not required
• Unilock Unicare, Alliance, Surebond, BP Pro and Techniseal sealers can be used
• Product must be cleaned before sealing

Cleaners – Any paver cleaner may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures.

Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance.

Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!

TECHNICAL INFORMATION

ASTM C 936 Standard Specifications for Solid Concrete Interlocking Paving Units

Conforms to:

• C140 for Absorption and Compressive Strength > 8,000 PSI
• C67 for Freeze-thaw Durability 
• C418 for Abrasion Durability

Unilock standards exceed 8,500 PSI for Il Campo® products with:

• 4% absorption avg.
• 5% absorption max.
• Dimensional Accuracy +/- 3/64″

Test results available upon request

Typical pour-in-place concrete ranges from approximately 2,500 to 5,500 PSI after 28 days.

Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines*

LEED INFORMATION

Materials & Resources: LEED V4:

Building Product Disclosure and Optimization

Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point

Sourcing of Raw Materials – Leadership Extraction Practices • 1 point

Material Ingredient Reporting – Material Ingredient Reporting • 1 point

Material Ingredient Reporting – Material Ingredient Optimization • 1 point

Environmental Product Declaration • 1 point

HEALTH PRODUCT DECLARATION

HPD For Il Campo

32-14-13-Unilock Non-Permeable-Concrete Base

32-14-13-Unilock Non-Permeable-Bitumen

32-14-13-Unilock Non-Permeable

32-14-13-Unilock Hybrid

For more information please contact your local Unilock representative

We’re here to help! Upload your specs for a complimentary review. Check Your Spec