Eco-Optiloc™ - Available In
Environmentally friendly paving continues to be on the forefront of our agenda for the future.
This paver has gained world-wide acceptance as the paver-of-choice for performance and as an environmental solution for stormwater runoff. Only the patented “L” shaped design allows you to achieve a superior lock-up that can withstand even the heaviest of loads residentially and commercially. The innovative design creates small voids between the pavers providing drainage into the sub-base.Colors
Natural
Special Order
Natural
River
Special Order
Custom Finish Options
Standard Finish
Premier Finish
Il Campo® Finish
Series® Finish
Umbriano® Finish
Custom Options
Shapes & Sizes
Standard
25 cm x 25 cm x 8 cm
9.875" x 9.875" x 3.125"
Special Order
Standard
25 cm x 25 cm x 8 cm
9.875" x 9.875" x 3.125"
Mechanical Installation
Features
Applications
Commercial Vehicular
Pedestrian
Permeable
Residential Vehicular
Custom Colors
May be available for this product. Minimum quantities will apply.
Surface Texture
Customizable
EnduraColor Facemix Technology
EnduraColor products are manufactured in a two-step process which combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. EnduraColor products are highly resistant to fading because the top layer prevents large, lighter color aggregates from showing through.
Special Order
Minimum quantities apply
Packaging
| Unit | SqFt Per | Per Bundle | Soldier LnFt Per | Sailor LnFt Per | Units Per | Lbs Per | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stones & Bundling | Thickness | Bundle | Layer | Section | Stone | Layers | Sections | SqFt | Section | Bundle | SqFt | Section | Bundle | SqFt | Section | Bundle | Layers | Section | Bundle |
Notes: Special Order - lead time required, minimum quantities apply. Sold in full bundles only and is produced on a refundable skid. Most standard colors are available by special order only and subject to minimum quantities. Custom finish and color options are available. *Weights and square feet may vary depending on plant manufacture and finish. Important: A urethane rubber paver mat must be used to prevent scuffing. This product is optimized for mechanical installation. All measurements are nominal. Contact Unilock for more information.
Patterns
Important Information
Eco-Optiloc is the paver-of-choice when it comes to vehicular load performance and as an environmental solution for permeable paved surfaces. The patented "L" shaped design allows you to achieve a superior lock- up that can withstand even the heaviest of loads. Surface textures can be customized for commercial projects.
Base Requirement & Bedding Course – open graded base specification.
Handling and Installation – A protective pad is recommended when doing the final paver compaction. This product can be installed mechanically or by hand.
Jointing Material and Joint Stabilization
- Use only select graded stone chips for void filling
- Open graded material such as ASTM #8 or granite chip 1/8”-3/16”, dependent on joint spacing of the pavers
Sealers
- Product may be sealed but it is not required
- Unilock Unicare, Alliance, Surebond, BP Pro and Techniseal sealers can be used
- Select type for desired aesthetics
- Product must be cleaned before sealing
Cleaners – Any paver cleaner may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures.
Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!
TECHNICAL INFORMATION
ASTM C 936 Standard Specifications for Solid Concrete Interlocking Paving Units
Conforms to:
- C140 for Absorption and Compressive Strength > 8,000 PSI
- C1645 for Freeze-thaw Durability
- C418 for Abrasion Resistance
Unilock standards exceed 8,500 PSI for Eco-Optiloc™ products with:
- 4% absorption avg.
- 5% absorption max.
Test results available upon request
Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines
LEED INFORMATION
Rainwater Management: LEED V4:
- Up to three points can be achieved for retaining rain water onsite based on the percentile kept.
- 85% (zero lot line projects only) – 3 points, 95% – 2 points and 98% – 3 points. (All except Healthcare – subtract one point) See LEED v4 for more specific project details.
Materials and Resources: LEED V4:
Building Product Disclosure and Optimization
Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point
Sourcing of Raw Materials – Leadership Extraction Practices • 1 point
Material Ingredient Reporting – Material Ingredient Reporting • 1 point
Material Ingredient Reporting – Material Ingredient Optimization • 1 point
Environmental Product Declaration • 1 point
HEALTH PRODUCT DECLARATION
Eco-Optiloc with Standard finish HPD
Solar Reflectance
Eco-Optiloc™ Natural, 0.30
Eco-Optiloc™ River, 0.32
SRI
Eco-Optiloc™ Natural, 32
Eco-Optiloc™ River, 34
For more information please contact your local Unilock representative.
All measurements are nominal
Colors, product data, and availability are subject to change without notice. Please confirm all details with your local Unilock Dealer or call 1-800-UNILOCK (1-800-864-5625) for availability in your area. The colors shown should only be used as a guide. Final color selections should always be made from actual samples.