Courtstone® - Available In
Old World EleganceCourtstone brings a luxurious, old-world elegance to the public realm, with Ultima™ providing up to four times the strength of conventional poured concrete. Using Reala™ Technology, the unique shapes of Courtstone were cast from real European cobblestones, but manufactured with a consistent base for efficient installation and superior interlock. This, in combination with its rich color palette, makes Courtstone a frequent choice for vehicular paving, borders and banding accents.
Sold Separately/Blended on Site
Dawn Mist / Pebble Taupe
Sold Separately/Blended on Site
Shapes & Sizes
21.5 cm x 13 cm x 6 cm
8.5" x 5.125" x 2.375"
18.5 cm x 13 cm x 6 cm
7.25" x 5.125" x 2.375"
16.5 cm x 13 cm x 6 cm
6.5" x 5.125" x 2.375"
14.5 cm x 13 cm x 6 cm
5.75" x 5.125" x 2.375"
13 cm x 13 cm x 6 cm
5.125" x 5.125" x 2.375"
Learn About Courtstone
Courtstone Torture Test
Borders & AccentsPedestrianResidential Vehicular
Deep, rich colors and a multitude of unique Reala™ textures combine to deliver the timeless beauty of Unilock Elegance. From the timeworn look of European cobblestones, to the classic luxury of riven natural stone slabs, our Elegance collection offers styles you can’t get anywhere else, and thanks to Ultima Concrete, the look you purchase is the look that will last, with up to 4x the strength of poured in place concrete.Reala Surface TechnologyUltra-realistic textures cast from actual natural stone, brick and cobblestones.Ultima Concrete TechnologyFor heavy traffic loads, this proprietary manufacturing process creates pavers and walls with up to 4 times the strength of poured concrete.
Deep, rich colors and a multitude of unique Reala™ textures combine to deliver the timeless beauty of Unilock Elegance. From the timeworn look of European cobblestones, to the classic luxury of riven natural stone slabs, our Elegance collection offers styles you can’t get anywhere else, and thanks to Ultima Concrete, the look you purchase is the look that will last, with up to 4x the strength of poured in place concrete.
EnduraColor Facemix Technology
EnduraColor products are manufactured in a two-step process which combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. EnduraColor products are highly resistant to fading because the top layer prevents large, lighter color aggregates from showing through.
|Unit||SqFt Per||Per Bundle||Soldier LnFt Per||Sailor LnFt Per||Units Per||Lbs Per|
|Stones & Bundling||Thickness||Bundle||Layer||Section||Stone||Layers||Sections||SqFt||Section||Bundle||SqFt||Section||Bundle||SqFt||Section||Bundle||Layers||Section||Bundle|
Notes: *Sold in full bundles only and is shipped on a refundable skid and available in all colors. All measurements are nominal. Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing.
Base Requirement & Bedding Course – Standard paver specification
Handling & Installation – A protective pad is required when doing the final paver compaction. Courtstone installs in a linear random pattern only. Be sure to offset joints for best appearance. Cutting is seldom required if you carefully select the end paver sizes. It is recommended that the orientation of the pavers is oriented in the direction to avoid “visual corn rows” as much as possible. The random pattern is the most pleasing. Minimum radius 6 feet for curved applications. Install from multiple pallets for best color distribution.
- All paver applications (no walls)
Jointing Material and Joint Stabilization
- Good: Ordinary dry joint sand stabilized by a water-based or solvent based joint sand stabilizer sealer.
- Better: EasyPro , Techniseal RG+, Polymeric Sand MAX
- Best: Alliance Sand - Eurostone
- Polymeric sand is often installed too high in the joint. Ensure the sand level is lower than the paver surface to allow for a three dimensional appearance.
- Alliance Gator Maxx Polymeric Sand is recommended for concrete overlays.
- Courtstone installations should always be encapsulated with a tighter joint paver on the outside row such as Copthorne, Umbriano or Belpasso. Using Courtstone at the outer edge of an installation may result in joint sand loss on the outside row.
- Product may be sealed but it is not required
- Sealers generally decrease the slip resistance of a product
- Unilock Unicare, Alliance, Surebond, BP Pro and Techniseal sealers can be used
- Semi-gloss sealers will still appear glossy on this product. Please test a stone to ensure the desired effect.
- Product must be cleaned before sealing
Cleaners – Any paver cleaner from Unilock, Techniseal, Surebond or BP- Pro is acceptable.
Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance
Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!
ASTM C 936 Standard Specifications for Solid Concrete Interlocking Paving Units
- C140 for Absorption and Compressive Strength > 8,000 PSI
- C1645 for Freeze-thaw Durability
- C418 for Abrasion Resistance
Unilock standards exceed 10,000 PSI for Courtstone® products with:
- 4% absorption avg.
- 5% absorption max.
Test results available upon request
Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines
Materials & Resources: LEED V4:
Building Product Disclosure and Optimization
Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point
Sourcing of Raw Materials – Leadership Extraction Practices • 1 point
Material Ingredient Reporting – Material Ingredient Reporting • 1 point
Material Ingredient Reporting – Material Ingredient Optimization • 1 point
Environmental Product Declaration • 1 point
HEALTH PRODUCT DECLARATION
For specifications please contact your local Unilock representative