Universal Coping - Available In
Shapes & Sizes
48 cm x 36 cm x 7 cm
18.875" x 14.125" x 2.75"
Architectural Pillar Cap
71.1 cm x 71.1 cm x 10 cm
28" x 28" x 3.875"
May be available for this product. Minimum quantities will apply.
EnduraColor Facemix Technology
EnduraColor products are manufactured in a two-step process which combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. EnduraColor products are highly resistant to fading because the top layer prevents large, lighter color aggregates from showing through.
Garden WallRetaining WallSeat WallSteps
|Face Feet Per||Linear Feet Per||Units Per||Per Bundle||Lbs Per|
|Stones & Bundling||Bundle||Unit||Bundle||Unit||Bundle||Face Feet||Layers||Sections||Unit||Bundle|
Notes: Sold in full bundles only and is shipped on a required, refundable skid. All measurements are nominal. Contact your Unilock representative for further information. *For custom options, please contact your Unilock representative.
Handling and Installation – Care must be taken to avoid tossing stones so that they bang against each other. Damage to the surface appearance can happen if handled too rough.
Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!
ASTM C 1372 Standard Specifications for Dry-Cast Segmental Retaining Wall Units
Unilock meet and exceeds:
- C140 for Absorption and Compressive Strength > 6000 PSI
- C1262 for Freeze Thaw Durability <1% mass loss
- C1372 Overall dimensional variations permissable for width, height and length ± 1/8” (±3.2mm)
- NCMA Zone 3 Recommendations for de-icing salt exposure with Compressive Strength >5500 psi
Test results available upon request
Materials & Resources: LEED V4:
Building Product Disclosure and Optimization
Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point
Sourcing of Raw Materials – Leadership Extraction Practices • 1 point
Material Ingredient Reporting – Material Ingredient Reporting • 1 point
Material Ingredient Reporting – Material Ingredient Optimization • 1 point
Environmental Product Declaration • 1 point
HEALTH PRODUCT DECLARATION