Series™

Important Information

The sparkling granite, quartz and feldspar crystals embedded into the surface of Series set it apart from any other paver. With our proprietary EnduraColor technology, these non-fading minerals will provide endless performance with a lifetime of beauty and surface resilience.

Base Requirement & Bedding Course – standard or open graded paver base material for raised patios and step areas.

Handling and Installation – A protective pad is required when doing the final paver compaction. Care must be taken to avoid tossing stones so that they bang against each other. Damage to the surface appearance can happen if handled too rough. Both random and linear patterns are common. Install from multiple pallets for best color distribution. Gloves recommended.

Accent compatibility – The, 4” x 8”, and the 6” x 6” units can be used as a sailor or soldier course and as a soldier course.The 4” x 8” and the 6” x 6” sizes are ideal for accenting in walls.

Jointing Material and Joint Stabilization

• Good: Dry jointing sand
• Best: Ordinary dry jointing sand stabilized by a solvent based joint sand stabilizer sealer (for impervious installations only)
• Important: Squeegee water from surface during polymeric sand activation to prevent a white residue from forming

Special Note: Polymeric Sands are not recommended

Sealers

• Product may be sealed but it is not required
• Unilock Unicare, Alliance, Surebond, BP Pro and Techniseal sealers can be used
• Product must be cleaned before sealing

Cleaners – Any paver cleaner from Unilock, Techniseal, Surebond or BP- Pro is acceptable.  Using efflorescence oracid-based cleaners will enhance the textural and color appearance.

Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance.

Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!

TECHNICAL INFORMATION

ASTM C 936 Standard Specifications for Solid Concrete Interlocking Paving Units

Unilock meets and exceeds:

• C140 for Absorption and Compressive Strength > 8,000 PSI
• C1645 for Freeze-thaw Durability
• C418 for Abrasion Resistance

Test results available upon request

Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines

LEED INFORMATION

Materials & Resources: LEED V4:

Building Product Disclosure and Optimization

Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point

Sourcing of Raw Materials – Leadership Extraction Practices • 1 point

Material Ingredient Reporting – Material Ingredient Reporting • 1 point

Material Ingredient Reporting – Material Ingredient Optimization • 1 point

Environmental Product Declaration • 1 point

HEALTH PRODUCT DECLARATION

HPD For Series

Solar Reflectance
Series MI 018 Z, 0.51
Series MI 010 X, 0.50
Series SS0016, 0.41
Series SS0025, 0.42
Series Golden Tan, 0.40
Series Chardonnay Tan, 0.39
Series Peppered Granite, 0.38
Series SS0026, 0.37
Series Coral Gem, 0.37
Series Ice Grey, 0.35
Series GT0426, 0.33
Series GT0427 F, 0.31
Series Mineral Ice 0.31

SRI
Series MI 018 Z, 60
Series MI 010 X, 58
Series SS0016, 46
Series SS0025, 48
Series Golden Tan, 45
Series Chardonnay Tan, 44
Series Peppered Granite, 42
Series SS0026, 41
Series Coral Gem, 41
Series Ice Grey, 38
Series GT0426, 36
Series GTO 427 F, 33
Series Mineral Ice, 33