Revela™ - Available In
Shapes & Sizes
89 cm x 54 cm x 6 cm
35" x 21.25" x 2.375"
54 cm x 36 cm x 8 cm
21.25" x 14.125" x 3.125"
36 cm x 36 cm x 8 cm
14.125" x 14.125" x 3.125"
36 cm x 18 cm x 8 cm
14.125" x 7.125" x 3.125"
Borders & AccentsCommercial VehicularPedestrianResidential VehicularRoof DeckRoof Deck Pedestal
May be available for this product. Minimum quantities will apply.
EnduraColor Facemix Technology
EnduraColor products are manufactured in a two-step process which combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. EnduraColor products are highly resistant to fading because the top layer prevents large, lighter color aggregates from showing through.
|Unit||SqFt Per||Per Bundle||Soldier LnFt Per||Sailor LnFt Per||Units Per||Lbs Per|
|Stones & Bundling||Thickness||Bundle||Layer||Section||Stone||Layers||Sections||SqFt||Section||Bundle||SqFt||Section||Bundle||SqFt||Section||Bundle||Layers||Section||Bundle|
Sold in full bundles only and is produced and sold on a required, refundable skid. Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing. All measurements are nominal.
The large unit sizes and the pleasant colors of Beacon Hill make it a fabulous patio or pool deck paver.
Base Requirement & Bedding Course – standard paver base specification.
Handling and Installation– A protective pad is required when doing the final paver compaction. Both herringbone, random and linear patterns are common.
Jointing Material and Joint Stabilization
- Good: Dry jointing sand
- Best: Any Polymeric Sand or ordinary dry jointing sand stabilized by a water-based or solvent-based joint sand stabilizer sealer
- Important: Squeegee water from surface during polymeric sand activation to prevent a white residue from forming
- Product may be sealed but it is not required
- Unilock Unicare, Alliance, Surebond, BP Pro and Techniseal sealers can be used
- Select type for desired aesthetics
- Product must be cleaned before sealing
Cleaners – Any paver cleaner may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures.
Special note - To avoid issues with height variance, do not use as a direct overlay on concrete.
6cm product is not intended for vehicular applications.
Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!
ASTM C 936 Standard Specifications for Solid Concrete Interlocking Paving Units
Unilock pavers meet and exceed:
- C140 for Absorption and Compressive Strength > 8,000 PSI
- C1645 for Freeze-thaw Durability
- C418 for Abrasion Resistance
Test results available upon request
Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines
Materials & Resources: LEED V4:
Building Product Disclosure and Optimization
Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point
Sourcing of Raw Materials – Leadership Extraction Practices • 1 point
Material Ingredient Reporting – Material Ingredient Reporting • 1 point
Material Ingredient Reporting – Material Ingredient Optimization • 1 point
Environmental Product Declaration • 1 point
HEALTH PRODUCT DECLARATION