Skyline™ - Not Available In
Custom Finish Options
Shapes & Sizes
24" x 24" (606)
60.6 cm x 60.6 cm x 5 cm
23.875" x 23.875" x 2"
Ideal for Pedestals
Special Order where not in stock
May be available for this product. Minimum quantities will apply.
EnduraColor Facemix Technology
EnduraColor products are manufactured in a two-step process which combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. EnduraColor products are highly resistant to fading because the top layer prevents large, lighter color aggregates from showing through.
PedestrianRoof DeckRoof Deck Pedestal
|Unit||SqFt Per||Per Bundle||Soldier LnFt Per||Sailor LnFt Per||Units Per||Lbs Per|
|Stones & Bundling||Thickness||Bundle||Layer||Section||Stone||Layers||Sections||SqFt||Section||Bundle||SqFt||Section||Bundle||SqFt||Section||Bundle||Layers||Section||Bundle|
Note: Sold in full bundles only. All measurements are nominal. Important: Contact Unilock for information.
Installation – These slabs can be installed on grade for pedestrian applications or on pedestals for roof deck applications
Handling and Installation – A protective pad is required when doing the final paver compaction, if required.
Jointing Material and Joint Stabilization
- Good: Dry jointing sand
- Best: Any Polymeric Sand or ordinary dry jointing sand stabilized by a water-based or solvent-based joint sand stabilizer sealer
- Important: Squeegee water from surface during polymeric sand activation to prevent a white residue from forming
- Product may be sealed but it is not required
- Unilock Unicare, Alliance, Surebond, BP Pro and Techniseal sealers can be used
- Select type for desired aesthetics
- Product must be cleaned before sealing
Cleaners – Any paver cleaner may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures.
Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!
ASTM C 1782 Standard Specifications for Utility Segmental Concrete Paving Slabs
Unilock meets and exceeds:
- Modulus of Rupture – minimum 650 psi
- C1645 for Freeze-thaw Durability
- C418 for Abrasion Resistance
Test results available upon request
Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines
Materials and Resources: LEED V4:
Building Product Disclosure and Optimization
Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point
Sourcing of Raw Materials – Leadership Extraction Practices • 1 point
Material Ingredient Reporting – Material Ingredient Reporting • 1 point
Material Ingredient Reporting – Material Ingredient Optimization • 1 point
Environmental Product Declaration • 1 point
HEALTH PRODUCT DECLARATION