fbpx
Menu

Anchorlock®

Product: Anchorlock® Color: Rustic Red
Product: Anchorlock® Color: Rustic Red
Product: Anchorlock® Color: Rustic Red
Product: Anchorlock® Color: Rustic Red
Product: Anchorlock® Color: Rustic Red, Natural
Product: Anchorlock® Color: Rustic Red, Natural
Product: Anchorlock® Color: Natural
Product: Anchorlock® Color: Natural
Product: Anchorlock® Color: Natural
Product: Anchorlock® Color: Natural
Anchorlock’s unique “L” shaped design gives this paver the ultimate in locking strength. Not only does it have six locking sides, but is also capable of sustaining enormous loads due to the two axis upon which the concentrated loads are placed. These properties make this paver ideal for mechanical installation, which allows for economical paving of large areas.

Colors

Natural

Natural

Special Order

Custom Options

Custom Colors and Finishes
With so many different options for customization we ask that you contact your local Unilock Representative for more information about customizing this product.
Minimum quantities will apply.

Shapes & Sizes

Standard

22.5 cm x 22.5 cm x 8 cm

8.875" x 8.875" x 3.125"

Special Order

Anchorlock 1/3 Stone

11.16 cm x 11.16 cm x 8 cm

4.375" x 4.375" x 3.125"

Standard

22.5 cm x 22.5 cm x 8 cm

8.875" x 8.875" x 3.125"

Special Order

Standard

22.5 cm x 22.5 cm x 8 cm

8.875" x 8.875" x 3.125"

Special Order

Standard

1/3 Stone

11.16 cm x 11.16 cm x 8 cm

4.375" x 4.375" x 3.125"

Std Stone

22.5 cm x 22.5 cm x 8 cm

8.875" x 8.875" x 3.125"

Special Order

Features

Applications
Commercial Vehicular
Pedestrian
Residential Vehicular
Custom Colors
May be available for this product. Minimum quantities will apply.
Special Order
Minimum quantities apply
Surface Texture
Standard

Packaging

Unit SqFt Per Per Bundle Soldier LnFt Per Sailor LnFt Per Units Per Lbs Per
Stones & Bundling Thickness Bundle Layer Section Stone Layers Sections SqFt Section Bundle SqFt Section Bundle SqFt Section Bundle Layers Section Bundle
Sold in full bundles only. 1/3 stones incorporated within the standard bundle. All measurements are nominal.

Patterns

Anchorlock A

100% Standard

Downloads

Pattern Sheet (.pdf)

.PAT (Imperial)

.PAT (Metric)

Important Information

Base Requirement & Bedding Course – standard paver base specification.

Handling and Installation – A protective pad is recommended when doing the final paver compaction. Fixed pattern. Intended for mechanical installation. Can be hand laid if required.

Jointing Material and Joint Stabilization

  • Good: Dry jointing sand
  • Best: Any Polymeric Sand or ordinary dry jointing sand stabilized by a water-based or solvent-based joint sand stabilizer sealer
  • Important: squeegee water from surface during polymeric sand activation to prevent a white residue from forming

Sealers

  • Product may be sealed but it is not required
  • Unilock Unicare, Alliance, Surebond, BP Pro and Techniseal sealers can be used
  • Select type for desired aesthetics
  • Product must be cleaned before sealing

Cleaners – Any paver cleaner may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures.

Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!

Paver Calculator

TECHNICAL INFORMATION

ASTM C 936 Standard Specifications for Solid Concrete Interlocking Paving Units

Conforms to:

  • C140 for Absorption and Compressive Strength > 8,000 PSI
  • C67 for Freeze-thaw Durability
  • C418 for Abrasion Durability

Unilock standards exceed 8,500 PSI for Anchorlock® products with:

  • 4% absorption avg.
  • 5% absorption max.
  • Dimensional Accuracy +/- 3/64”

Test results available upon request

Meets the U.S. Architectural & Transportation Barrier Compliance Board Slip-Resistance Surfaces Advisory Guidelines*

 

LEED INFORMATION

Materials & Resources: LEED V4:

Building Product Disclosure and Optimization

Sourcing of Raw Materials – Sourcing of Raw Materials and Extraction • 1 point

Sourcing of Raw Materials – Leadership Extraction Practices • 1 point

Material Ingredient Reporting – Material Ingredient Reporting• 1 point

Material Ingredient Reporting – Material Ingredient Optimization • 1 point

Emvironmental Product Declaration • 1 point

 

Also available on CADdetails


We’re here to help! Upload your specs for a complimentary review.